White VS 3 Sewing Machine parts
These parts are used. We will usually have only a quantity of 1 per part, unless otherwise noted. These parts may need a minor cleaning or rust removal. Refer to each part for more information.
White VS 3 Sewing Machine hinges. Need cleaning.
QTY AVAIL: 2
$6.00
 
White VS 3 Sewing Machine MISC set screws. These two set screws are small and are located under the machine. Will adjust for First Class shipping.
$2.00    
 
White VS 3 Faceplate1.
Needs cleaning. Note: there is no needle clamp. Make sure the decals match those on your
$30.00  
White VS 3 Faceplate2.
Needs cleaning.
Note: there is no needle clamp. Make sure the decals match those on your machine.
$30.00  
 
White VS 3 Sewing Machine presser foot & thumb screw. Some rust, needs cleaning.
$30.00 
White VS III presser foot thumb screw
$15.00 
White VS III presser foot
$25.00 
White VS III spring under feed dog area
$12.00 
White VS III stitch length assembly. Needs cleaning.
$25.00 
White VS III stitch length reference plate
$12.00 
White VS III tension release. Needs cleaning.
$15.00 
White VS III TWO spool pins. Note: the very ends were broken off in the machine. These are still functional.
$8.00 
White VS III thumb screw on other side of face plate as pictured. Will adjust for First Class shipping.
$5.00 

Also check these pages for more parts:

Didn’t find what you were looking for?  Try this link…

White VS 3 Sewing Machine feed dog. Needs cleaning. Remove rust easily with Evaporust.
QTY AVAIL: 2
$15.00   
White VS 3 Sewing Machine needle plate. Minor rust, needs cleaning. Comes with screw.
QTY AVAIL: 2
$20.00    
 
White VS 3 Sewing Machine shuttle carrier. Needs a cleaning and polishing.
QTY AVAIL: 2
$15.00    
 
White VS 3 balance wheel. Needs a cleaning and polishing.
QTY AVAIL: 2
$26.00    
 
White VS 3 Sewing Machine FRONT slide plate. Needs a further cleaning and polishing. Some pitting. Selling as is. Size is approx 1 1/8" wide x 3" long.
QTY AVAIL: 2
$15.00    
 
White VS III BACK Slide plate.
$15.00
White VS III bobbin winder dated 1890. Needs cleaning.
$30.00
White VS III feed dog assembly FEED DOG SOLD SEPARATELY.
$15.00
White VS III part1. Needs cleaning.
$15.00






White VS III part2. Needs cleaning. $15.00
White VS III part3. $1.50
Will adjust for First Class Ship. This is for the SCREW ONLY. 






White VS III part4. Needs cleaning.  $15.00
White VS III slack thread take up lever. Needs cleaning.
$25.00