White VS 3 Sewing Machine parts
These parts are used. We will usually have only a quantity of 1 per part, unless otherwise noted. These parts may need a minor cleaning or rust removal. Refer to each part for more information.
White VS 3 Sewing Machine hinges. Need cleaning.
$4.00
 
White VS 3 Faceplate2.
Needs cleaning.
Note: there is no needle clamp. Make sure the decals match those on your machine.
$12.00  
 
White VS 3 Sewing Machine presser foot with thumb screw. Remove rust easily with Evapo-rust.
$8.00

White VS III presser foot thumb screw
$4.00 
White VS III presser foot
$12.00 
White VS III stitch length assembly. Needs cleaning.
$18.00 
White VS III stitch length reference plate
$4.00 
White VS III tension release. Needs cleaning.
$5.00 
White VS III TWO spool pins. Note: the very ends were broken off in the machine. These are still functional. Secure them to them machine using J-B Weld.
$2.00 

Also check these pages for more parts:

Didn’t find what you were looking for?  Try this link…

White VS 3 parts
White VS 3 Sewing Machine feed dog. Needs cleaning. Remove rust easily with Evaporust.
$4.00   
White VS 3 Sewing Machine needle plate. Minor rust, needs cleaning. Comes with screw.
QTY AVAIL: 2
$10.00    
 
White VS 3 Sewing Machine shuttle carrier. Needs a cleaning and polishing.
QTY AVAIL: 2
$7.00    
 
White VS 3 balance wheel. Needs a cleaning and polishing.
QTY AVAIL: 2
$18.00    
 
White VS 3 Sewing Machine FRONT slide plate. Needs a further cleaning and polishing. Some pitting. Selling as is. Size is approx 1 1/8" wide x 3" long.
QTY AVAIL: 2
$4.00    
 
White VS III bobbin winder dated 1890. Needs cleaning.
$15.00
White VS III part1. Needs cleaning.
$6.00






White VS III part2. Needs cleaning. $6.00
White VS III part3. $1.00
Will adjust for First Class Ship. This is for the SCREW ONLY.  






White VS III part4. Needs cleaning.  $7.00
White VS III slack thread take up lever. Needs cleaning.
$15.00