Singer 500A Sewing Machine Parts
These parts are used. We will usually have only a quantity of 1 per part, unless otherwise noted. These parts may need a minor cleaning or rust removal. Refer to each part for more information.
Singer 500A balance wheel. Has peeling paint, needs restoring.
$10.00    
 
Singer 500A bobbin case positioning bracket
$6.00
Singer 500A disk. Needs cleaning.
$6.00
Singer 500A feed dog. Needs cleaning.
$8.00    
 
Singer 500A light cover
$8.00    
 
Singer 500A metal cover
$3.00    
 
Singer 500A needle plate. Needs cleaning.
$7.00    
 
Singer 500A part2
$5.00    
 
Singer 500A screw for bottom tray. Will adjust for First Class ship.
$3.00    
 
Singer 500A set screws to secure machine to table. Will adjust for First Class ship.
$1.00
Singer 500A stitch length faceplate
$5.00

Didn’t find what you were looking for?  Try this link…

Singer 500A bobbin case and bobbin. Needs cleaning.
$7.00  
Singer 500A bobbin winder. Needs a cleaning. Remove rust with Evaporust.
$10.00  
Singer 500A end cap for reverse lever. Will adjust for First Class ship.
$4.00  
Singer 500A drop feed plate
$5.00   
Singer 500A lever
$7.00   
Singer 500A light. This was cut from machine.
$15.00  
Singer 500A needle clamp. Needs cleaning.
$6.00    
 
Singer 500A part1
$8.00    
 
Singer 500A presser foot thumb screw. Will adjust for First Class ship.
$3.00    
 
Singer 500A screws for bottom. Will adjust for First Class ship.
$1.00   
 
Singer 500A slide plate
$7.00    
 
Singer 500A zig zag presser foot
$7.00