Singer 185J Sewing Machine parts
These parts are used. We will usually have only a quantity of 1 per part, unless otherwise noted. These parts may need a minor cleaning or rust removal. Refer to each part for more information.

Singer 185J  bobbin winder.
Needs cleaning and rust removed. Needs new bobbin winder tire.
QTY AVAIL: 2
$10.00
Singer 185J hook. Needs cleaning.
$8.00
Singer 185J presser foot thumb screw. Needs cleaning. Will adjust for First Class ship.
QTY AVAIL: 2
$3.00
Singer 185 face plate. Needs cleaning and rust removal. Some pitting.
$5.00
Singer 185 hand wheel. Needs cleaning, chips in paint. Some pitting. Good piece for restoration.
$8.00
Singer 185 light bracket. Needs cleaning. Will adjust for First Class ship.
$6.00
Singer 185 needle clamp. Needs cleaning and rust removal. Will adjust for First Class ship.
$5.00
Singer 185 presser foot regulating screw. Needs cleaning. Will adjust for First Class ship.
$6.00
Singer 185 reverse lever assembly. Needs cleaning.
$10.00
Singer 185 needle plate. Needs cleaning.
$6.00

*SPECIAL*
BUY ALL THE PARTS ON THIS PAGE AS SHOWN FOR
$55.00

Didn’t find what you were looking for?  Try this link…

Singer 185J  feed dog. Needs cleaning.
$7.00
Singer 185J bobbin winder thread guide. Needs cleaning. Will adjust for First Class ship.
QTY AVAIL: 2
$4.00
Singer 185J SMALL PART by slack thread regulator. Will adjust for First Class ship.
$3.00
Singer 185 upper thread guide. Will adjust for First Class ship.
$3.00
Singer 185 hinge. Comes with 2 sets screws for securing machine to table. Only 1 hinge is included. Will adjust for First Class ship.
$3.00
Singer 185 motor bolt. Needs cleaning. Will adjust for First Class ship.
$3.00
Singer 185 part1. Needs cleaning and rust removal. Will adjust for First Class ship.
$4.00
Singer 185 presser foot. Needs cleaning. Will adjust for First Class ship.
$4.00
Singer 185 slide plate spring. Needs cleaning. Will adjust for First Class ship.
$8.00
Singer 185 thread cutter. Needs cleaning. Will adjust for First Class ship.
$3.00