Singer 15 Sewing Machine parts
These parts are used. We will usually have only a quantity of 1 per part, unless otherwise noted. These parts may need a minor cleaning or rust removal. Refer to each part for more information.
Singer 15 face plate-
old style. Needs a minor cleaning.
$10.00
old style. Needs a minor cleaning.
$10.00
Singer 15 Sewing Machine Feed Dog
Comes with screws.
In good used condition. Needs a cleaning.
QTY AVAIL: 4
$7.00
Comes with screws.
In good used condition. Needs a cleaning.
QTY AVAIL: 4
$7.00
Singer 15 Needle Plate
Used condition. Needs a cleaning. Remove rust with Evaporust.
QTY AVAIL: 5
$5.00
Used condition. Needs a cleaning. Remove rust with Evaporust.
QTY AVAIL: 5
$5.00
Singer 15 Rear Access Plate2. Needs a cleaning. Remove rust with Evaporust.
$5.00
$5.00
Singer 15 slide plate, minor pitting.
$5.00
$5.00
Singer 15 Shuttle Position Plate part # 125290
Used condition. Needs a minor cleaning. Remove rust with Evaporust.
$3.00
Used condition. Needs a minor cleaning. Remove rust with Evaporust.
$3.00
Singer 15 Needle Clamp & Thread Guide
Remove rust with Evaporust. Can be restored to new!. Selling as is.
QTY AVAIL: 3
$4.00
Remove rust with Evaporust. Can be restored to new!. Selling as is.
QTY AVAIL: 3
$4.00
Singer 15 Bobbin case dated 1911. Some rust. Needs a cleaning. Selling as is. Note: this bobbin case does NOT have the 'finger', as this is an early style bobbin case. Confirm that this is the correct bobbin case before purchase.
$8.00
$8.00
Singer 15 bobbin case.
Note: the bobbin case finger is in the 11oclock position. Confirm that this is the correct bobbin case before purchase.
$8.00
Note: the bobbin case finger is in the 11oclock position. Confirm that this is the correct bobbin case before purchase.
$8.00
Singer 15 Shuttle Race body complete. Needs a cleaning. Selling as is. Comes with screws.
QTY AVAIL: 5
$8.00
QTY AVAIL: 5
$8.00
Singer 15 motor mount screw. Shipping charge will be adjusted for First Class Shipping.
$1.00
$1.00
Singer 15 power cord
$6.00
$6.00
*SPECIAL*
BUY ALL THE PARTS ON THIS PAGE AS SHOWN FOR
$70.00
BUY ALL THE PARTS ON THIS PAGE AS SHOWN FOR
$70.00
Also check these pages for more parts:
Didn’t find what you were looking for? Try this link…
Singer 15 Sewing Machine Thread Cutter. Some rust. Can be cleaned up to look like new.
QTY AVAIL: 3
$3.00
QTY AVAIL: 3
$3.00
Singer 15 Balance Wheel
Good used condition. Needs a cleaning. Comes with screw.
$10.00
Good used condition. Needs a cleaning. Comes with screw.
$10.00
Singer 15 spoked balance wheel. Needs a cleaning.
QTY AVAIL: 2
$15.00
QTY AVAIL: 2
$15.00
Singer 15 spoked balance wheel2. Needs a cleaning.
5 1/2" diameter
$15.00
5 1/2" diameter
$15.00
Singer 15 Hook
Needs a cleaning. Minor rust. Can be restored to new.
QTY AVAIL: 5
$7.00
Needs a cleaning. Minor rust. Can be restored to new.
QTY AVAIL: 5
$7.00
Singer 15 Presser Foot Regulator Screw
Good used condition. Needs a cleaning.
QTY AVAIL: 3
$6.00
Good used condition. Needs a cleaning.
QTY AVAIL: 3
$6.00
Singer 15 Stitch Length Plate FOR PARTS. NOTE: does not come with adjusting thumb screw.
Used condition. Needs a cleaning.
$4.00
Used condition. Needs a cleaning.
$4.00
Singer 15 Stitch Length Plate Needs a cleaning.
$7.00
$7.00
Singer 15 Sewing Machine Bobbin Winder Thread Guide
Used condition. Needs a minor cleaning. Remove rust with Evaporust.
QTY AVAIL: 2
$4.00
Used condition. Needs a minor cleaning. Remove rust with Evaporust.
QTY AVAIL: 2
$4.00
Singer 15 Presser Bar Lifter1
Remove rust with Evaporust. Can be restored to new! Selling as is.
QTY AVAIL: 2
$7.00
Remove rust with Evaporust. Can be restored to new! Selling as is.
QTY AVAIL: 2
$7.00
Singer 15 Presser Bar Lifter2
Remove rust with Evaporust. Can be restored to new! Selling as is.
QTY AVAIL: 2
$7.00
Remove rust with Evaporust. Can be restored to new! Selling as is.
QTY AVAIL: 2
$7.00
Singer 15 Presser Foot
There's a little bit of rust, easily removed. Selling as is.
QTY AVAIL: 2
$7.00
There's a little bit of rust, easily removed. Selling as is.
QTY AVAIL: 2
$7.00
Singer 15 Presser Foot2
There's a little bit of rust, easily removed. Selling as is.
$7.00
There's a little bit of rust, easily removed. Selling as is.
$7.00
Singer 15 knee controller. Comes with 2 screws for installing on table.
$10.00
$10.00
Singer 15 Presser foot bar assembly
$12.00
$12.00
Singer 15 misc thumb screws. Will adjust shipping for First Class.
$2.00
$2.00
Singer 15 shirring foot. Remove rust with Evaporust.
$4.00
$4.00
Singer 15 Stitch Length Screw. Remove rust with Evaporust.
$6.00
$6.00
Singer 15 set screws. Will adjust for First Class Shipping.
$1.00
$1.00
Singer 15 reverse lever. Remove rust with Evaporust.
$7
$7