Singer 15-90 Sewing Machine parts

Fact:  The Singer model 15-90 is the same as the 15-91, except that the 15-90 has an external belt driven motor, and the 15-91 has a gear driven motor.

These parts are used. We will usually have only a quantity of 1 per part, unless otherwise noted. These parts may need a minor cleaning or rust removal. Refer to each part for more information.
Singer 15-90 Bobbin Winder. BRAND NEW
Note: This does not come with the 2 screws you need to mount it AND it does not come with a bobbin tire. Get a bobbin tire here.
NOTE: This is NOT compatible with a Singer 15-91.
$15.00  
Vintage Singer 15-90 Sewing Machine Feed Dog
Comes with screws. In good used condition. Needs a cleaning. Selling as is.
Compatible with Singer Sewing Machine Models:
201-2, 221, 222, 301, 1200-1, 15-88, 15-90 & 15-91
$8.00  
Vintage Singer 15-90 Sewing Machine Shuttle Hook
Used condition. Needs a cleaning. Selling as is.
Compatible with Singer Sewing Machine Models:
15-88, 15-90, 15-91, 15-125 & 293B.
$8.00  
Singer 15-90 needle clamp and thread guide. Needs a minor cleaning.
Compatible with Singer Sewing Machine Models: 201, 201-2, 221, 222, 223, 301, 1200-1, 15-88, 15-90, 15-91 & 15-125
$7.00  
Singer 15-90 race assembly. Needs cleaning.
$15.00
Singer 15-90 spool pin. Remove rust with Evaporust.
$4.00
Singer 15-90 light 1947
$20.00
Singer 15-90 bobbin case and bobbin
$15.00
Singer 15-91 Shuttle Race Body #125303
Singer 15-90 hinges
$8.00
Singer 15-90 presser foot lifter.
$15.00
Singer 15-90 rear access plate 1947.
$10.00
Singer 15-90 presser foot thumb screw
$4.00

Also check these pages for more parts:

Vintage Singer 15-90 Sewing Machine Thread Cutter
This part slides up over presser bar. Shows wear. Can be cleaned up to look like new. Selling as is.
Compatible with Singer Sewing Machine Models: 15, 27, 28, 66, 99, 101 , 127, 128   
$4.00  
Vintage Singer 15-90 Presser Foot Regulator Screw
$7.00  
Singer 15-90 balance wheel. Needs a cleaning.
$20.00  
1947 Singer 15-90 hinge, part #124450
$20.00
Singer 15-90 reverse lever assembly. Needs cleaning.
$15.00 
Singer 15-90 Needle Plate
The finish is peeling. Can be restored.
$4.00    
Singer 15-90 slide plate.Needs cleaning. Some rust on the back. Remove rust easily with Evaporust
$7.00    
Singer 15-90 drop feed adjustment screw
$7.00    
Singer 15-90 face plate and tension assembly 1947
$18.00    
Singer 15-90 motor 1947. Needs a tuneup.
0.6 amps
$10.00    
Singer 15-90 presser foot bar assembly. Needs cleaning.
$16.00    
Singer 15-90 presser foot. Needs cleaning.
$7.00    

Didn’t find what you were looking for?  Try this link…