National Designer Rotary Zig Zag Sewing Machine Parts
These parts are used. We will usually have only a quantity of 1 per part, unless otherwise noted. These parts need a cleaning and/or rust removal.
The parts came off of this machine...
National Designer Rotary Zig Zag Sewing Machine
National Designer Rotary Zig Zag access plate2. Has a chip on bottom.
$6.00    
 
National Designer Rotary Zig Zag bobbin case and bobbin.
$10.00    
 
National Designer Rotary Zig Zag bobbin winder. Needs cleaning. Remove rust with Evaporust. Everything moves freely.
$12.00    
 
National Designer Rotary Zig Zag dual spool pin holder Remove rust with Evaporust.
$8.00  
National Designer Rotary Zig Zag feed dog. Needs cleaning.
$8.00    
 
National Designer Rotary Zig Zag gear cover1. Needs cleaning.
$5.00    
 
National Designer Rotary Zig Zag hinges.
$4.00    
 
National Designer Rotary Zig Zag lever1
$8.00    
 
National Designer Rotary Zig Zag lever3.
$8.00    
 
National Designer Rotary Zig Zag light.Needs cleaning and rust removal. Also needs new wiring.
$10.00    
National Designer Rotary Zig Zag motor bracket
$6.00    
 
National Designer Rotary Zig Zag needle bar. Needs a cleaning and rust removal.
$10.00    
National Designer Rotary Zig Zag needle plate. Needs cleaning. Remove rust with Evaporust.
$6.00    
 
National Designer Rotary Zig Zag part1. Will adjust for First Class ship.
$1.00    
 
National Designer Rotary Zig Zag part3
$2.00    
National Designer Rotary Zig Zag part5. Will adjust for First Class ship.
$2.00    
National Designer Rotary Zig Zag part7, SET SCREW. Will adjust for First Class ship.
$2.00    
National Designer Rotary Zig Zag presser foot bar assembly. Needs cleaning.
$12.00    
National Designer Rotary Zig Zag presser foot. Remove rust with Evaporust.
$5.00    
National Designer Rotary Zig Zag slide plate spring. Needs cleaning. Will adjust for First Class ship.
$4.00    
National Designer Rotary Zig Zag upper thread guide
$6.00    

*SPECIAL*
BUY ALL THE PARTS ON THIS PAGE AS SHOWN FOR
$60.00

Didn’t find what you were looking for?  Try this link…

National Designer Rotary Zig Zag access plate1.
$6.00    
 
National Designer Rotary Zig Zag balance wheel. Needs cleaning and rust removal.
$12.00    
 
National Designer Rotary Zig Zag bobbin winder thread guide. Use Evaporust to remove rust. Will adjust for First Class shipping.
$4.00
National Designer Rotary Zig Zag cotter pin. Will adjust for First Class shipping.
$1.00    
National Designer Rotary Zig Zag face plate. Needs cleaning, and minor rust removal.
$8.00   
National Designer Rotary Zig Zag foot controller. Needs cleaning and new wiring. Untested.
$5.00   
National Designer Rotary Zig Zag gear cover2. Needs cleaning.
$4.00    
 
National Designer Rotary Zig Zag hook
$12.00    
National Designer Rotary Zig Zag lever2. Will adjust for First Class ship.
CAP ONLY
$2.00    
National Designer Rotary Zig Zag lever4. Will adjust for First Class ship.
CAP ONLY
$2.00    
 
National Designer Rotary Zig Zag motor bolt. Will adjust for First Class shipping.
$1.00    
 
National Designer Rotary Zig Zag motor. Needs new wiring and motor maintenance. Untested.
$5.00    
 
National Designer Rotary Zig Zag needle clamp
$6.00    
National Designer Rotary Zig Zag part2
$2.00    
National Designer Rotary Zig Zag part4
$2.00
National Designer Rotary Zig Zag part6
$2.00   
National Designer Rotary Zig Zag plate, needs cleaning.
$5.00
National Designer Rotary Zig Zag presser foot thumb screw. Will adjust for First Class Ship.
$1.00
National Designer Rotary Zig Zag pressure regulating screw. Remove rust with Evaporust.
$5.00
National Designer Rotary Zig Zag slide plate. Note: the plating is peeling off, this item is for restoration.
$2.00
National Designer Rotary Zig Zag part8. Will adjust for First Class ship.
$1.00